V8매니아 로고
V8 Mania 자료실 커뮤니티 오픈마켓

튜닝자료실

카마로ss와 관련된 튜닝자료를 공유합니다.

Home > 자료실 > 튜닝자료실

LT4 + 45% 인잭터 소개 튜닝자료실 -카마로ss동호회

LT4 + 45% 인잭터 소개

김도영(SunShine)  |  조회수 :3635  |  2019-07-19 (10:50)

Our first 100% XDI manufactured and tested DI-Injectors are designed for the new GM LT series engines. With a 45% increase in flow over stock LT4 injectors, these supply the required fuel flow for high horsepower applications without the need for auxiliary fuel systems. These injectors are based on the original GM LT4 injector, which makes them a perfect drop in solution. Most of the ECU Injector characteristics stay the same.
Every Injector gets tested at 100bar and 200bar on OEM testing equipment at XDI. Every set gets flow matched to within ±0.5% at 100bar and 200bar fuel pressure !!!

Testing on several fully instrumented engines (8x O2, 8x EGT) done by Katech Inc. has shown unequaled results in terms of cylinder distribution, repeatability and stability at pressures up to 3000psi. Tuning changes required are minimal, offsets and current driver parameters stay the same. The injectors are E85 compatible and have so far been tested up to 1308bhp on engine dyno and 1067whp on roller dyno (Ignite E90).

Maximum Fuel Pressure is 220bar / 3200psi.

Straight E85, 1067whp GDI only !!!

no meth, no PFI, no extra ECUs, no wiring, full control, full OBD Diagnostics.



High horsepower GM Gen V V8 and V6 direct injection engines including LT5, LT4, LT1, L86, L83 and LV3
E85 conversions of GM Gen V V8 and V6 engines

2014+ C7 Corvette LT1
2015+ C7 Z06 Corvette LT4
2019 C7 ZR1 Corvette LT5
2016+ Camaro SS LT1
2017+ Camaro ZL1 LT4
2016+ CTS-V LT4
2014+ Silverado and Sierra with 4.3L LV3, 5.3L L83 and 6.2L L86 engines
2015+ Suburban, Tahoe, Yukon and Escalade with 5.3L L83 and 6.2L L86 engines



rated static flow rate: 25.6g/sec at 10MPa
– 67% more flow than production LT1/L86 injectors (15.3g/sec)
– 45% more flow than production LT4 injectors (17.7g/sec)
– E85 compatible

maximum pressure:
200bar / 2900psi (tested rock solid on engine and roller dyno)
240bar / 3500psi (under perfect conditions, no pressure pulsations)


이름하야 LT4 + 45% 더 인젝터...


기존 17.7g/sec 였던거가 25.6g 으로 상승이 가장 큰 팩터고요. HP 튜너지원하는 인젝터 데이터 제공

(맵핑에서 가장 중요한 요소 입니다. 아니면 삽질만 미친듯이 할수 있슴)



다이노상에서 메탄이고 아무것도 안걸고 휠 1000마력까지 뽑아낼수 있는용량을 넉넉히 제공한다 합니다.


이게 아시는분은 아시겠지만, 점점 올라갈수록 연료의 리미트가 결국 뽑을수 있는 한계점이 됩니다.



https://store.katechengines.com/xdi-high-flow-lt4lt5-injectors-45-p819.aspx


판매사이트는 여기, 오 가격이



3,999,92불...4,000불... 40만원? 아니네 0이 하나 더 붙었네요 ㅠ 세금까지하면 500만원...ㅎㄷㄷ


가격이 넘 사악하군요.




  • 이강혁(케서린아빠) | 2019-07-19 11:13
헐~~
미국생산 부품은 관세 없지않나 ??
  •  김도영(SunShine) | 2019-07-19 11:14
       부가세 내셔야죠. 10프로.
  •   이강혁(케서린아빠) | 2019-07-19 11:25
        아~~
그놈에 부가세
  • 천준호(튜브) | 2019-07-19 15:50
순정 레귤과 펌프에 달아도 효과 있나요?
  •  김도영(SunShine) | 2019-07-19 15:59
       전혀요. ㅎㅎ 역효과만나는수가..
  •   박준성(딴딴이) | 2019-07-30 04:10
        역관광 당하는 수가 있다는 거군요 ㅎㅎ
  • 김주현(신록군) | 2019-07-19 20:14
먼가 인젝터가 멋져보이는데 집에 데코용으로 놔둬두 무방할듯합니다 ㅋㅋㅋ 근데 비싸냉 ㅡㅡ
  • 김철기(달구지) | 2019-07-20 03:08
깔꼼하게 한방에 해결되는...
번호 제목 작성자 등록일 조회수
527 트렁크 운전석 핵간지...그것은?  [2]
김도영(SunShine) I 2020-12-29 (15:54) I 조회: 3635
김도영(SunShine) 2020-12-29 (15:54) 3635
526 연료펌프 LT vs ZL1 비교자료.  [4]
김도영(SunShine) I 2020-12-28 (11:26) I 조회: 3635
김도영(SunShine) 2020-12-28 (11:26) 3635
525 해외 싱글 터보 작업사진  [1]
김도영(SunShine) I 2020-12-28 (11:03) I 조회: 3633
김도영(SunShine) 2020-12-28 (11:03) 3633
524 쿡스헤드와 AWE배기 사운드입니다.
김도영(SunShine) I 2020-12-28 (10:21) I 조회: 3637
김도영(SunShine) 2020-12-28 (10:21) 3637
523 맥너슨 2300 + 87미리 풀리 + 메탄  [2]
김도영(SunShine) I 2020-12-09 (09:51) I 조회: 3634
김도영(SunShine) 2020-12-09 (09:51) 3634
522 Kw suspension  [3]
김철기(달구지) I 2020-11-27 (15:09) I 조회: 3631
김철기(달구지) 2020-11-27 (15:09) 3631
521 레조 장착 ㅎㅎ  [4]
김도영(SunShine) I 2020-11-19 (10:56) I 조회: 3636
김도영(SunShine) 2020-11-19 (10:56) 3636
520 맥너슨 3100 출시 예정  [10]
김도영(SunShine) I 2020-11-16 (10:30) I 조회: 3636
김도영(SunShine) 2020-11-16 (10:30) 3636
519 LT2 매니 후기  [11]
김지원(Dimitri) I 2020-11-01 (21:37) I 조회: 3639
김지원(Dimitri) 2020-11-01 (21:37) 3639
518 Lt2 매니폴더 다이노결과 맛보기  [4]
김도영(SunShine) I 2020-10-30 (20:56) I 조회: 3635
김도영(SunShine) 2020-10-30 (20:56) 3635
517 LT2 메니 작업 성공  [10]
조경철(보그마로) I 2020-10-29 (22:21) I 조회: 3639
조경철(보그마로) 2020-10-29 (22:21) 3639
516 LT2 메니 작업 2 ing...  [10]
조경철(보그마로) I 2020-10-28 (22:52) I 조회: 3633
조경철(보그마로) 2020-10-28 (22:52) 3633
515 LT2 메니 작업 ing...  [19]
조경철(보그마로) I 2020-10-26 (21:21) I 조회: 3637
조경철(보그마로) 2020-10-26 (21:21) 3637
514 다이노 측정 해보았습니다   [13]
이도균(갱주) I 2020-10-16 (12:17) I 조회: 3637
이도균(갱주) 2020-10-16 (12:17) 3637
513 Lt2 콜벳 디자인 커버 이식  [10]
이도균(갱주) I 2020-10-13 (21:23) I 조회: 3633
이도균(갱주) 2020-10-13 (21:23) 3633
512 Lt2 인테이크 데이터 시트  [10]
김도영(SunShine) I 2020-09-30 (13:05) I 조회: 3633
김도영(SunShine) 2020-09-30 (13:05) 3633
511 2016 SS 1차 촉매 이후부터 배기 Tip 까지의 그림입니다  [4]
최재훈(쵸이) I 2020-09-26 (21:20) I 조회: 3632
최재훈(쵸이) 2020-09-26 (21:20) 3632
510 Lt2 인테이크 이식 , 인테이크 높이확인  [3]
김도영(SunShine) I 2020-09-20 (09:59) I 조회: 3631
김도영(SunShine) 2020-09-20 (09:59) 3631
509 6.5세대 이상에서 고압펌프를 lt4로 바꿀때 주의할사항  [1]
김도영(SunShine) I 2020-09-14 (15:37) I 조회: 3632
김도영(SunShine) 2020-09-14 (15:37) 3632
508 와우 Lt2 인테이크 매니 이식   [11]
김도영(SunShine) I 2020-09-13 (23:24) I 조회: 3668
김도영(SunShine) 2020-09-13 (23:24) 3668